Auto Pump HP

Product Code: 091-9HP

Description

125 PSI Max Rating, 120V, 3.5A
Vehicle mount compressor ensures air brake system is properly pressurized for immediate truck departure from station
Pressure switch regulated operation automatically senses low pressure in air system and restores proper pressure, preventing brake lock-up
Pressure gauge provides system status
No interference with engine mounted air compressor
Factory set PSI actuation points: 105 "On", 125 "Off" with Adjustment differential 20 PSI
Sealed ball bearings for long service life
2 year warranty

The Auto Pump HP system is a permanent split capacitor A.C. motor operating a single cylinder air compressor designed specifically for installation on vehicles with air brakes. During long idle periods of the vehicle, when even the slightest seepage can cause an air brake system pressure to drop below the brake lockup pressure, the Auto Pump HP automatically starts to maintain the pressure.

The Auto Pump HP motor is directly coupled to the compressor section eliminating all belts and pulleys assuring long life and reliable operation. A heavy duty, fixed set-point pressure switch starts the compressor when the pressure switch drops below 105 PSI and stops the compressor when 125 PSI is attained. A small pressure gauge indicates the Auto Pump output pressure and helps with installation and troubleshooting. The moisture trap provided permits routine draining of accumulated moisture in the Auto Pump output line.

PSI	125
Input Voltage	120
Orientation	horizontal
Input	120 Vac, 50/60 Hz, 3.5 Amps
Output	1.27 CFM, Open Flow, 125 PSI Max
Warranty	2 year
Weight	13 lbs
Motor Type	Shaded Pole AC
Motor Horsepower	1/8 HP
Pressure Switch	Adjustable Set-Point Factory set to 105 PSI Cut-In, 125 PSI Cut-Out
Outlet Connection	1/4 NPT, Female

	Instruction Manual, 240 Vac. pdf (221 Kb)
	Product Specifications, 240 Vac.doc (179 Kb)
	Product Specifications, 120 Vac.doc (179 Kb)
	Instruction Manual, 120 Vac.pdf (223 Kb)