Auto Pump® 12V, W/AUTO DRAIN

Product Code: 091-9C-12V-AD


Auto Pump with an Automatic Drain installed.  A normally open solenoid valve drains the moisture from the trap each time the compressor shuts down. The Auto Drain assures that the filter bowl is always drained and does this without intervention by maintenance personnel. 

The 091-9C-12V-AD is a small air compressor designed to mount on vehicles with air brakes to maintain the air pressure in the air brake system while the vehicle is not in use. A pressure switch senses when the system pressure drops and starts the compressor which then runs until pressure is restored. All ball bearing construction, lubricated for life, assures reliable operation and requires no servicing.


  • Vehicle mount compressor ensures the truck’s air brake system is properly pressurized for immediate dispatch from the station
  • Pressure switch regulated operation automatically senses low pressure in the air system and restores the proper pressure, preventing brake lock-up
  • 15A circuit breaker installed in pressure switch
  • Factory set PSI actuation points: 75 “ON”, 95 “OFF”
  • Adjustment differential 20 PSI, 100 PSI max
  • Output: 0.30 SCFM @ 80 PSI, 0.35 SCFM @ 60 PSI
  • No interference with an engine mounted air compressor
  • Sealed ball bearings for long service life
  • Compact size
  • Auto Drain
  • Horizontal (091-9C-12V-AD-HOR) and Vertical (091-9C-12V-AD-VER) mounts available

Input Voltage12
Input12 Vdc @ 11 Amps Max
Output0.30 SCFM @ 80 PSI, 0.35 SCFM @ 60 PSI
Factory set PSI actuation points75 "ON", 95 "OFF"
Weight6 lbs.