Single Bar Graph Display
Product Code: 091-94-12
Description
This Universal Single Battery Bank Voltage Display may be installed in any 12/24V system
1. Locate Indicator in a convenient place on the vehicle.
2. Place the template in position and center punch in 4 places.
3. Drill holes as shown.4. Cut out square hole.
5. Connect wiring to charger using butt connector supplied.
6. Install as shown.
7. Insert (4) #8-32 screws supplied and tighten, (CAUTION: Do not over tighten because you will bend the plastic bezel and break the watertight seal ).
| Bargraph Type | Single |
| DC Volts | yes |