DC Energy Display

Product Code: 023-4346-0


  • Displays 12 or 24 volts
  • Displays up to 500 amps
  • Displays energy used and remaining for up to 3,000 amp-hour capacity
  • Monitor voltage on up to three separate banks of batteries
  • Monitors Charge / Discharge Amperage
  • Monitors Total Energy: Amp-Hours or Percent of Charge
  • Alarms: High / low voltage and low amp-Hours remaining
  • 3 year warranty
Warranty 3 Years
Weight .25 lbs
Power Supply 9.5 to 33.0 VDC, .018 amps nominal
Operating Temperature 32 to 122 F (0 to 50 C)
Accuracy Better than +/- 0.1 VDC for Volts and 1% +/- 1 Amp for Amps
Volts Range 9.5 to 33.0 VDC
Amps Range -500 to +500 Amps (Applies to Bank 1 Only)
Capacity Remaining Range -0 to +100% (Applies to Bank 1 Only)
Shunt 500 Amp, 50 mV
DC Amps yes
Digital Display yes
Watertight yes
DC Volts yes
Amp Hours yes
Amp-Hours Range -500 to +500 Amps (Applies to Bank 1 Only)
Alarms High, Low Voltage & Low Amp-Hours

The DCE provides accurate low cost instrumentation for 3 banks of batteries between 9.5 and 33 volts. The unit displays voltage for three banks and amps or amp-hours for the house bank. It tracks all current entering and leaving the house bank and applies Peukert's and efficiency factors. Low and High voltage alarms and Low Amo-Hours Remaining alarms can be set on the house bank. When activated, the built-in 85 dB alarm will sound and the display will flash. The DCE outputs NMEA 0183 serial data or the data line can be programmed as an external alarm output or as a charger on-off control. The DCE comes complete with a precision 500 amp shunt and is designed to work with 50-500 amp 50 mV shunts.