Auto Charge 20/20

Product Code: 091-216-20/20

Description

  • 40A total: 20A battery charger, 20A battery saver
  • Automatic operation regulates output to a single battery bank
  • Separate 20 Amp ATC fuse protected “Battery Saver” output eliminates drain on vehicle battery when in station
  • Clean output poses no interference with radios and other mobile devices
  • Front ammeter indicators
  • Dual cooling fans
  • Automatic current limit
  • Reverse polarity protected
  • AC input circuit breaker protection
  • 3 year warranty


Charger with Battery Bank single
Charger, Output Amperage 20
Battery Saver Only No
Battery Saver 20
'PLC', Chargers with Parasitic Load Compensation No
Charger, Output Voltage VDC 12
Charger, Input Voltage VAC 120
Charger- Hz 50/60
International No
Charger, Low Profile Design No
Charging Profile Float
Input Fuse 10 Amps, Resettable Circuit Breaker
Input 120 Vac, 50/60 Hz, 8.5 Amps Max
Warranty 3 Years
Weight 13 lbs
Battery Saver Low Ripple Output Fuse 20 Amp, ATC fuse, 091-FUS0257020
Battery Saver Output Power 14.0 Vdc, 20 Amps Max
Battery Charger Output Power 12 Vdc, 20 Amps Max
LED Status Indicators AC On, Reverse Polarity
Output Waterproof Circuit Breaker 30 Amps, Part Number: 090-0030-0
EV Series No

The Auto Charge 20/20 is an intergrated charger with Battery Saver Low Ripple. Designed for installation on vehicles with a single battery system. The charger completely operates automatically and stops charging the batteries when they are fully charged. There is no trickle charge and therefore no danger of overcharging and water boil-off.

The Battery Saver output provides uninterrupted power to accessory loads whenever the vehicle is connected to AC power. This complete package simplifes installation and improves system relialility due to parasitic loads. These loads will be connected to the battery when the vehicle is in use but are removed automatically when shore power is supplied and are then powered by the Battery Saver.

Ammeters are provided to indicate Charger and Battery Saver output currents.

The charger is also ruggedized to withstand the shock and vibration encountered by vehicle mounted equipment.