Euro Charger I VHO
Product Code: 091-162-12
Description
- 40A, 12V charge rating
- 120/240V operation
- Automatic operation regulates output to a single battery bank
- Automatically charges and supports parasitic DC loads: data terminals, radios, hand lights, etc. assuring battery is ready for vehicle start
- Front panel amp meter indicates total output
- Meets CE requirements
- Designed for the rigors of emergency vehicle use; heavy duty aluminum case with protective front panel plate and wire strain relief
- 3 year warranty
Charger, Output Amperage | 40 |
Battery Saver Only | No |
Chargers With Parasitic Load Compensation | No |
Charger with Remote Display included | Yes |
Chargers with Remote Display Options | Yes |
Charger, Output Voltage VDC | 12 |
Charger, Input Voltage VAC | 120 or 240 |
Charger- Hz | 50/60 |
Charger, Low Profile Design | No |
Charging Profile | Float |
Input Fuse | 8 Amps, Fast Acting |
Input | 120 / 240 Vac, 50/60 Hz, 10 / 5 Amps Max |
Output | 12 Vdc, 40 Amps |
Output Fuse | 80 Amps (Part Number: 090-0080-0) |
Warranty | 3 Years |
Weight | 22 lbs |
Charge Indicator | 0-50 Amps |
EV Series | No |
Instruction Manual, 12 Volt.pdf (320 Kb) | |
Product Specifications, 24 Volt.doc (1.5 Mb) | |
Instruction Manual, 24 Volt.pdf (320 Kb) | |
Product Specifications, 12 Volt.doc (1.5 Mb) | |
Datasheet.pdf (728 Kb) |
Euro Charger I VHO, 24 Volts, 20 Amps - 091-162-24
The Euro Charger I VHO is a fully automatic battery charger designed to meet CE requirements. Ruggedly constructed with a single output, it float charges the battery and may be installed on the vehicle. Extremely precise voltage control maintains the charger output constant with variations in load or line voltage input. Active current limiting, limits the output current so as not to exceed its rated value when charging deeply discharged batteries or if the vehicle is started while charging. Two unique remote displays are available as options for this charger. One provides a simple, two LED display. A green LED indicates that power is ON while a red LED indicates that output current is flowing from the charger. A second display, a single bar graph, provides a graphic display of the charger output voltage.