This universal dual battery bank voltage display can be installed in any 24V system (negative ground only). The dual bar graph voltage display wires directly to the battery for straightforward installation and monitoring. A 12V model is also available (091-76-12).

INDICATOR INSTALLATION

1. Locate Indicator in a convenient place on the vehicle.

2. Place the template in position and center punch in 4 places.

3. Drill holes as shown.

4. Cut out square hole.

5. Connect wiring to batteries in accordance with the wiring diagram

6. Install as shown.

7. Insert (4) #8-32 screws supplied and tighten. (CAUTION: Do not over tighten because you will bend the plastic bezel and break the watertight seal).