Load Manager - S

Product Code: 091-32-S

Description

  • Sheds 7 Loads
  • Automatically Sheds Loads to Prevent Electrical System Overload
  • Eliminates Power Surges in Electrical System
  • Controls Load Relays
  • Energizes External Relays by Supplying 12 Volts
  • Remote Manual Override
  • Load Shed Priority Programmable
  • 3 year warranty

The Load Manager S, is a standard Load Manager, except that the external relays are energized by supplying +12 volts to them. This permits connection to relays that have one side of their coils connected to ground.

The Load Manager S is a precision solid-state controller, which sequentially switches "ON" seven relays at 1/2 second intervals. Individual switches, which the user may install, can select a combination of outputs. These switches may be used to turn the outputs "ON" or "OFF" at any time. The "Master Control" switch starts the sequential switch when it is turned "ON". Likewise turning the "Master Control" switch "OFF" sequentially de-energizes the loads at 1/2 second intervals.

In addition the Load Manager S monitors the vehicle's battery voltage. When electrical loads exceed the alternator output, the voltage drops. The Load Manager S senses this and the outputs are individually de-energized. Up to 5 outputs are controlled. Only as many are shut down as are required to maintain the system voltage. The shut down sequence may be altered through programming switches internal to the Load Manager S and accessible through a removable cap. An output indicator terminal is provided to permit connecting an LED indicator, which is energized whenever the load-shed circuit is functioning. A remote bypass switch may be installed to completely bypass the Load Manager S and operate the relays manually. A plug-in connector simplifies installation.

Load Management yes
Loads 7
Input 12 Vdc
Output 40 Ohms to Drive Relays
Warranty 3 years
Weight .5 lbs
Set Point 11.5 Volts