Auto Pump AC AD, Model #: 091-9B-1-AD

auto pump ac with auto drain
  • 100 PSI Max Rating, 120V, 4A
  • Vehicle mount compressor ensures air brake system is properly pressurized for immediate
    truck departure from station
  • Automatically purges water separator bowl every time compressor cycles off via a normally open solenoid
  • Pressure switch regulated operation automatically senses low pressure in air system and restores proper pressure, preventing brake lock-up
  • No interference with engine mounted air compressor
  • Factory set PSI actuation points: 75 "On", 95 "Off" with Adjustment differential 20 PSI
  • Sealed ball bearings for long service life
  • Compact size
  • 1 year warranty

  • Auto Pump AC with Auto Drain
    Specifications
  • Downloadable
    Files
  • Outline
    Drawing
  • Related
    Products
Input: 120 Vac, 50/60 Hz, 1.8 Amps
Output: 1.0/1.3 CFM, Open Flow, 100 PSI Max               
Motor Type: Shaded Pole AC
Motor Horsepower: 1/8 HP
Pressure Switch: Adjustable Set-Point
                                 Factory set to 75 PSI Cut-In, 95 PSI Cut-Out
Outlet Connection: 1/4 NPT, Female
Weight: 16 lbs
Warranty: 1 Year




Instruction Manual.pdf (421 Kb)
Product Specifications.doc (94 Kb)











outline drawing 091-9b-1-ad
Auto Pump 12 Volt - 091-9-12V
Auto Pump 12 Volt with Auto Drain - 091-9-12V-AD
Auto Pump Timer - 091-150
Auto Pump 12 Volt HP, Horizontal Mount - 091-9-12V-HP-HOR
Auto Pump 12 Volt HP, Vertical Mount - 091-9-12V-HP-VER
Mounting Plate for Auto Pump 12 Volt and 12 Volt HP - 091-9-12V-HP-H
Auto Pump AC with Auto Drain - 091-9B-1
Mounting Plate for Auto Pump AC - 091-9H-1
AC Auto Pump Timer - 091-150-115
Auto Pump HP - 091-9HP
Auto Pump HP with Auto Drain - 091-9HP-AD
Mounting Plate for Auto Pump HP - 091-9HP-H
Auto Pump Tester - 091-205

The Auto Pump AC AD is an 091-9B-1 Auto Pump with an Automatic Drain installed.  A normally open solenoid valve drains the moisture from the trap each time the compressor shuts down. The Auto Drain assures that the filter bowl is always drained and does this without intervention by maintenance personnel.
The Auto Pump AC AD is a 120 volt 60 Hz shaded pole A.C. motor operating a single cylinder air compressor. During long idle periods of the vehicle, when even the slightest seepage can cause an air brake system pressure to drop below the brake lockup pressure, the Auto Pump AC automatically starts to maintain the pressure.
The Auto Pump AC motor is directly coupled to the compressor section eliminating all belts and pulleys and assuring long life and reliable operation. A heavy duty pressure switch is adjusted to start the compressor when the system pressure drops below 75 PSI and stops the compressor when 95 PSI is attained. The start up pressure is field adjustable - the pressure differential between start up and stopping is fixed.