DC Energy Display, Model #: 023-4346-0

dc energy display
  • Displays 12 or 24 volts
  • Displays up to 500 amps
  • Displays energy used and remaining for up to 3,000 amp-hour capacity
  • Monitor voltage on up to three separate banks of batteries
  • Monitors Charge / Discharge Amperage
  • Monitors Total Energy: Amp-Hours or Percent of Charge
  • Alarms: High / low voltage and low amp-Hours remaining
  • 3 year warranty

  • DC Energy Display
    Specifications
  • Downloadable
    Files
  • Outline
    Drawing
  • Related
    Products
Power Supply: 9.5 to 33.0 VDC, .018 amps nominal
Operating Temperature: 32 to 122 F (0 to 50 C)
Accuracy: Better than +/- 0.1 VDC for Volts and 1% +/- 1 Amp for Amps
Volts Range: 9.5 to 33.0 VDC
Amps Range: -500 to +500 Amps (Applies to Bank 1 Only)
Amp-Hours Range: 100to 3000 A/H (Applies to Bank 1 Only)
Capacity Remaining Range: -0 to +100% (Applies to Bank 1 Only)
Shunt: 500 Amp, 50 mV
Alarms: High, Low Voltage & Low Amp-Hours
NMEA 0183: $IIXDR, V; $IIXDRA, A; $IIXDR,G
Weight: .25 lbs
Warranty: 3 Years

Instruction Manual.pdf (160 Kb)
Product Specifications.doc (98 Kb)











outline drawing 023-4346-0
DC Voltmeter Display (DCV) - 023-4348-0
Temperature Display (TG-3) - 023-4350-0
AC Energy Display (ACE) - 023-4349-0
Engine Monitor (VOTT) - 023-4400-0
Generator AC System Monitor - 023-4500-0
Generator AC/DC System Monitor (VAAFH-AC/DC) - 091-247








The DCE provides accurate low cost instrumentation for 3 banks of batteries between 9.5 and 33 volts. The unit displays voltage for three banks and amps or amp-hours for the house bank. It tracks all current entering and leaving the house bank and applies Peukert's and efficiency factors. Low and High voltage alarms and Low Amo-Hours Remaining alarms can be set on the house bank. When activated, the built-in 85 dB alarm will sound and the display will flash. The DCE outputs NMEA 0183 serial data or the data line can be programmed as an external alarm output or as a charger on-off control. The DCE comes complete with a precision 500 amp shunt and is designed to work with 50-500 amp 50 mV shunts.